Table of Contents
Advertisement
3. Quick Start
Please follow the following steps:
1. Before starting the thermal imager for the first time, charge the battery to full capacity
2. Connect smartphone and thermal imager with OTG cable
3. Carry the smartphone into the thermal imager holder
4. Press the power button to turn on the thermal imager
5. Manual focusing of the target
6. Press the shutter to capture picture
7. Click save
8. Download and install PC software OMEGA TI Analyzer
9. Install TI Analyzer software and related driver on PC
10. Start TI Analyzer professional analysis software
11. Connect the smartphone to PC using USB cable
12. Open the memory folder of the smartphone and find the thermal image file in IRs/Gallery to copy to
PC
13. Under the TI Analyzer software, in the Quick Collection Bar, right-click to add a thermal image
14. Double-click thermal image or full radiation thermal image video to open for analysis
15. For long-term online testing, connect thermal imager to PC using OTG cable
16. Open the thermal imager workspace in TI Analyzer
17. Click on the connection button, select USB+, and select the USB port number to connect thermal
imager
18. Full-radiation thermography video can be displayed, analyzed or recorded in real time
! Note: it is very important to adjust the focus. Inappropriate focusing will affect imaging clarity and
measurement accuracy.
Advertisement
Table of Contents
