Re-Packing The Mx170 - McIntosh MX170 Owner's Manual

Re-packing the MX170

When shipping the MX170, it is highly
recommended that the unit be packed as it was
originally shipped to avoid damage. Failure to
properly pack the unit will likely result in damage.
(The front panel is made of glass!) If you need any
of the packing material, you can contact McIntosh
Customer Service (see page 2). Use only packing
material that is in good condition and replace non-
servicable material.
It is very important that the four plastic feet are
attached to the bottom of the equipment. This
will ensure the proper equipment location on the
bottom pad. Failure to do this will result in shipping
damage.
Quantity Part Number Description
1 034256 Shipping carton only
4 033887 End cap
2 034493 Spacer pad
1 033697 Inside carton only
1 033725 Inner carton top pad
1 034576 Bottom pad
2 034446 Foam plug
4 017937 Plastic foot
4 400159 #10-32 x 3/4" screw
4 404080 #10 Flat washer
1 034499 Accessory Box
2 034500 Slotted foam
1 034501 Divider foam
24
MICROPHONE
MICROPHONE
STAND
MINI BOOM
SLOTTED
FOAM (2)
ACCESSORY
BOX
DIVIDER
FOAM
MICROPHONE
CABLE
SPACER
PADS