To find a passage within a track
1
Press and hold the control knob on the front
panel to the left or right (corresponding to
/
) or press
S
T
2
When you recognize the passage you want,
release the control knob (
remote).
➜
Normal playback continues.
➜
To resume, press ENTER/ÉÅ again.
To stop playback
●
Press CANCEL / 9 .
To interrupt playback
●
Press ENTER/ÉÅ during playback.
➜
The display freezes and the elapsed playing
time flashes when playback is interrupted.
Notes:
CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TUNER, DAB or AUX.
– you select standby.
– the set auto off time arrives.
To scan all discs in a disc
●
Press INTRO/SCAN on the remote to play
the first 10 seconds of each track in the whole
disc one by one.
➜
INTRO appears on the display.
➜
The playback will start from the first track of
the current disc.
To scan all discs in a disc
●
Press INTRO/SCAN on the remote again
until INTRO disappears.
5 /6
on the remote.
5 /6
on the
CD/MP3-CD Operation
Playing an MP3 disc
1
Load an MP3 disc.
➜
The disc reading time may exceed 10
seconds due to the large number of songs
compiled into one disc.
2
Press ALB +/- on the remote to select a desired
album.
3
Press the control knob on the front panel to the
left or right (corresponding to
press ¡ / ™ on the remote to select a desired
track.
➜
The album number will change accordingly as
you reach the first track of an album by pressing
(¡ on the remote) or the last track of an
S
album by pressing
T
4
Press ENTER/ÉÅ to start playback.
Supported MP3 disc formats:
– ISO9660, Joliet
– Maximum title number: 512 (depending on
filename length)
– Maximum album number: 255
– Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
– Supported Bit-rates: 32~256 (kbps), variable
bitrates
/
) or
S
T
(™ on the remote).
13