Page 2
SuperSpeed USB 3.0 rates up to 5 Gbps. The USBCR-4311 is ready to go to work without any additional software or downloads. The hub supports simultaneous and inter-card transfer from both card slots to maximize workflow and minimize downtime. It’s also...
Page 3
Precautions Important! This hub is not intended for charging connected USB devices. Speeds may vary based on system configuration and card speed. » » Do not attempt to disassemble or repair this product. » Clean this product with only a soft, dry cloth. »...
Page 4
Overview SD card slot microSD card slot USB 3.0 ports USB Type-C connector...
LED Status When the LED is on, the card reader is connected to a powered port on the computer. Connecting the Hub Connect the hub to your computer’s USB port or compatible OTG device with the integrated USB-C cable. In order for the hub to operate at maximum transfer rates, the hub must be connected to a computer’s USB 3.0 port.
Specifications Ports USB 3.0 Standard-A (×3) Compatible Memory Cards SD, SDHC, SDXC microSD, microSDHC, microSDXC Data Transfer Rate USB 3.0 SuperSpeed 5 Gbps System Requirements Windows XP or later macOS 10.4 or later Linux 2.4.1 or later Operating Temperature 32°F to 122°F (0°C to 50°C) Operating Humidity 20% to 85% RH Dimensions (L ×...
One-Year Limited Warranty This Xcellon product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.