SC iStick Kiya User Manual page 94

SC ISTICK KIYA – SELECTION & OPERATION OF THE VAPING MODES
Note
1� The TC-SS mode is specially designed for the 316 stainless steel coil�
2� The TC / TCR mode supports a maximum of 1�5 ohms� The device automatically switches to
VW mode when the resistance is greater than 1�5 ohms�
3� When Kanthal wire is used in TC / TCR mode, the device automatically switches to VW mode�
Settings in TCR Mode (M1, M2, M3)
In TCR mode (Temperature Coefficient of Resistance), the device can support various heads for
temperature-controlled vaping within different TCR value ranges� You can set the TCR value in a
range that is optimally matched to the coil that is being used�
92