Explanations Of The Vaping Modes - SC iStick Kiya User Manual

SC ISTICK KIYA – EXPLANATIONS OF THE VAPING MODES
VW Mode (Variable Wattage)
The VW mode supports vaporizer heads in a resistance range of 0�1 ohm to 3�5 ohms� Depending
on the evaporator head used, the power can range between 1 watt and 50 watts in VW mode�
TC Mode (Temperature Control | Variable Wattage)
In TC-Ni, TC-Ti and TC-SS modes, the device supports heads with coils made of nickel (Ni200),
titanium (Ti), and stainless steel (SS316) with a resistance of 0�05 ohm to 1�5 ohms� In TC mode –
depending on the vaporizer head used – the temperature can be between 100°C and 315°C�
TCR mode (Temperature Coefficients of Resistance)
In TCR mode (M1, M2, M3), the device supports heads made of nickel (Ni200), titanium (Ti), nickel
iron (NiFe), and stainless steel (SS 303/304/316/317) with a resistance range of 0�05 ohms to 1�5
ohms� Depending on the vaporizer head used, the temperature in TCR mode can be between
100°C and 315°C, or 200°F and 600°F� This mode allows you to select different temperature coeffi-
cients of the wire or to operate with different TCR values�
Please note that the resistance of the atomizer head used must be set before the first use
in TC mode.
90