Page 1
MCD 288 Quick Start Guide What’s in the Box? You should find these items upon opening the box. 15-pin D-Sub cable (with one Remote control with two AAA A/V cord (R/W/Y) end fixed on the main set) batteries External video box FM wire antenna Quick start guide AC power cord...
Page 2
Tips – See the User Manual for other TV connection options. – For connecting to a Progressive Scan TV, refer to the user manual for proper connections and detailed setup. AC power Speaker (right) Setting up the TV Press SOURCE (DISC on the remote) to select disc source.
Setting the clock In standby mode, press and hold CLOCK When the hour digits flash, press VOLUME-/+ (VOL+/- Press again and the minute digits flash. Then press CLOCK remote) to set the minutes. Press again to confirm the time setting. CLOCK Setting DVD menu options IMPORTANT!
Playing a disc Insert a disc into the slot loader. ➜ Make sure the label side is facing you. ➜ Make sure you have removed any other disc from the slot loader. Playback will start automatically. If not To stop playback, press 9. Programming and tuning to radio stations Press SOURCE (TUNER...