Table of Contents
Advertisement
Playing iPod
1
Select the dock adaptor of the correct type and
size, and snap it into the dock (See " Dock
adaptor " ).
2
Correctly place your iPod in the dock.
3
Connect the cables of the dock to DOCK IN
jacks on the main set correspondingly.
4
Press SOURCE repeatedly or iPod to select
iPod source.
●
The connected player will play automatically.
Notes:
– By using the buttons ( 2;, ¡1, 2™ and
VOLUME ) on the MCM239D and its remote
control, the following disc playback features are
available: Play/Pause, selecting next/previous track,
fast forwarding/rewinding and changing volume.
– The buttons ( 2;, ¡1, 2™ and VOLUME ) on
the MCM239D and its remote control can work
only with playback of the audio contents stored on
the docked player.
– Stop (Ç) function of disc playback is not
available to the docked player.
– To navigate the iPod menu, you may use MENU,
34and OK buttons on the MCM239D's remote
control.
Charging iPod battery using the
dock
Docking your iPod and connecting the dock to
MCM239D, you can charge the iPod in the
standby mode and power-on mode of
MCM239D.
Notes:
– In Eco power standby mode, iPod cannot be
charged.
– In standby mode, when no iPod is plugged in for
15 minutes, the set will auto switch to Eco power
mode.
iPod
25
Advertisement
Table of Contents
