NRS M15708 User Instructions

Maximum User Weight:
20st
127kg

General Safety Warning

Please ensure these instructions are fully
read and understood before installation/ use.
Retain these instructions in a safe place for
future reference.

Intended Use

The Folding Easy Fit Bed Rail provides a
stable support to help clients move
themselves to a sitting position and assist
them getting in and out of bed. This device is
suitable for both divan and slatted domestic
beds and is suitable for all bed sizes from
single to king-size.

Safety Precautions

• This device is suitable for adult use only.
• It is not suitable for use with young
children.
• It is not designed for use with profiling
beds.
• Please ensure the user does not exceed
the maximum user weight:
127kg (20 stones)
• Ensure the mattress is resting firmly
against the bed rail handle
Important safety note: There must be a gap
of at least 250mm from the headboard to the
Bed Rail Handle, and the mattress should
rest against the handle of the rail when fitted
to reduce the risk of head/limb entrapment.
User Instructions
Folding Easy Fit Bed Rail
M15708
Diagram 1
Showing Bed Rail fitted on a slatted bed
for a right hand assist

Installation

The position of the Bed Rail (which should
ideally be based on a clinical assessment)
should be such that when placed under the
mattress with the handle fitted, the client
(from a lying position) should be able to reach
the handle without stretching.
It is intended that the handle should be
positioned so that it angles away from the
bed head as shown in Diagram 1.
Page 1