NRS Medeci F24256 User Instructions

Bath seat

Advertisement

General Safety Warning
Please ensure these instructions are fully
read and understood before use. Retain
these instructions in a safe place for future
reference.

Intended Use

The Medeci Bath seat is designed to provide
a raised bathing seating position and to assist
with entering and leaving the bath. It is
secured to the base of the bath using the
sucker feet and to the sides of the bath with
the non-slip rubber width adjusters.
It is often recommended that the Medeci Bath
Seat is used in conjunction with a bath board.

Safety Precautions

DO ensure the bath and the seats are clean
and dry before use.
DO ensure all the bath seat sucker feet are
securely fixed and fitted flat on the base and
not angled by the curvature of the bath.
DO ensure the bath is deep enough before
fitting the bath seat. It is important that the
rubber ends of the seat make a good tight
contact against the flat part of the bath side
and away from any curvature.(See Diagram 2)
DO NOT attempt to remove the bath seat
before releasing the width adjusters and
sucker feet, as this may damage the bath
seat.
DO NOT use the seat if the max user weight
is exceeded.
DO NOT use in a highly sculptured or unusual
shaped bath, as the seat may not fit properly.
DO NOT use in a bath with a textured base.
Always check the bath seat is securely
fitted before use.
UI/F2456/F24268/F24279/SEP10/2
User Instructions
Medeci Bath Seat
F24256
152mm (6")
F24268
203mm (8")
F24279
305mm (12")

Maximum User Weight

DIAGRAM – 1
TURN WHEELS

Installation Instructions

1 - Before installation, please ensure the bath
and the bath seat sucker feet are completely
dry and clean.
2 - The seat width may be adjusted by
simultaneously turning the two wheels at the
end of the seat, in the same direction (See
diagram 1)
3 - Make sure the seat is narrow enough to fit in
the bath by turning the adjuster wheels. Place
centrally in the required position ensuring the
sucker feet are flat on the base and not angled
by the curvature of the bath. Press firmly down
to secure sucker feet.
Page 1 of 2
Expand
Contract

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Medeci F24256 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for NRS Medeci F24256

  • Page 1 Page 1 of 2 User Instructions Medeci Bath Seat F24256 152mm (6”) F24268 203mm (8”) F24279 305mm (12”) Maximum User Weight General Safety Warning Please ensure these instructions are fully read and understood before use. Retain these instructions in a safe place for future reference.
  • Page 2 DIAGRAM - 2 Bath too shallow NOTTINGHAM REHAB SUPPLIES Clinitron House, Excelsior Road, Ashby Park, Ashby-de-la-Zouch, Leicestershire, LE65 1JG, United Kingdom Tel: 0845 120 4522 Fax: 0845 121 8112 Int’l: +44(0) 1530 418378 Email: customerservice@nrs-uk.co.uk www.nrs-uk.co.uk UI/F2456/F24268/F24279/SEP10/2...

This manual is also suitable for:

Medeci f24268Medeci f24279

Table of Contents