Setting clock
There are two possible methods for setting the
clock: manually or automatically by using RDS.
Automatic clock setting
Refer to "Setting the RDS clock".
Manual clock setting
1
In standby mode, press CLOCK on the remote
control.
➜
The hour digits start flashing.
2
Hold down or press ALBUM/PRESET +/-
on the set repeatedly to set the hours.
3
Press CLOCK again.
➜
The minute digits start flashing.
4
Hold down or press ALBUM/PRESET +/-
on the set repeatedly to set the minute.
5
Press CLOCK to confirm the time.
Setting the timer
The set can be used as an alarm clock, whereby
the selected source (DAB, FM, DISC or USB)
starts playback at a preset time. Make sure the
clock is set before using the timer.
1
Press and hold TIMER on the remote control.
➜
TIMER ON and the hour digits start flashing.
2
Hold down or press ALBUM/PRESET +/- on
the set repeatedly to set the hour.
3
Press TIMER to confirm.
➜
The minute digits start flashing.
4
Hold down or press ALBUM/PRESET +/- on
the set repeatedly to set the minute.
5
Press TIMER to confirm .
➜
TIMER OFF and the hour digits start
flashing.
6
Hold down or press ALBUM/PRESET +/- on
the set repeatedly to set the hour.
7
Press TIMER to confirm.
➜
The minute digits start flashing.
8
Hold down or press ALBUM/PRESET +/- on
the set repeatedly to set the minute.
9
Press TIMER again.
➜
The source mode now is available for
selection.
0
Hold down or press ALBUM/PRESET +/- on
the set repeatedly to select the wake-up source
(DAB, FM, DISC or USB).
Note:
– if you choose FM as the wake-up source, Hold
down or press ALBUM/PRESET +/- on the set
repeatedly to select a preset station.
!
Hold down or press ALBUM/PRESET +/- on
the set repeatedly to set the wake-up volume.
"
Press TIMER to confirm.
➜
The timer is now set and activated.
Note:
– The set will exit from the timer setting mode if
no button is pressed within 10 seconds.
Activating and deactivating
TIMER
●
Press TIMER on the remote repeatedly to
activate or deactivate the timer.
➜
If deactivated, "TIMER OFF" appears.
Helpful hints:
The timer will not work at the set time if
– the timer is deactivated.
The set will switch to Tuner source automatically if :
– no CD is inserted when the selected source is
CD;
– no USB device is connected when the selected
source is USB.
Clock/Timer
25