Table of Contents
Advertisement
Basic operations
1
Press SYSTEM MENU to enter the Setup
Menu.
2
Press 2/3 to select a page to be set.
3
Press 5/4 to highlight an option.
4
Enter its submenu by pressing 3 or OK/
ENTER.
5
Move the cursor by pressing 5/4 to highlight
the selected item.
➜
In cases of value setting, press 5/4 to adjust
values.
6
Press OK/ENTER to confirm.
To return to the upper-level menu
●
Press 2.
To exit from the menu
●
Press SYSTEM MENU again.
➜
The settings will be stored in the player's
memory even if the player is switched off.
Note:
– Some of the features in the System Menu
Options are described in "Getting Started".
SYSTEM SETUP
TV SYSTEM
Allows you to select the colour system matching
the connected TV set.
➜
NTSC: If the connected TV is NTSC system,
select this mode. It will change the video signal of
a PAL disc and output in NTSC format.
➜
PAL: If the connected TV is PAL system,
select this mode. It will change the video signal of
a NTSC disc and output in PAL format.
➜
AUTO: If the connected TV is multi system,
select this mode.The output format will be in
accordance with the video signal of the disc.
System Menu Options
SCREEN SAVER
This function is used to turn the screen saver on
or off.
➜
ON: In STOP, PAUSE or No DISC mode, if
no actions are performed about 3 minutes, the
screen saver will be activated.
➜
OFF: Screen saver is disabled.
TV TYPE
Selects the aspect ratio of the TV to be
connected.
➜
4:3 PS (Pan and Scan mode ): If you have a
conventional TV set and your DVD is not
formatted for widescreen viewing, use this
setting. A wide picture is displayed on the whole
TV screen with a portion automatically cut off.
➜
4:3 LB (Letterbox mode ): If you have a
conventional TV set and your DVD is formatted
for widescreen viewing, use this setting. A wide
picture with bands displayed on the upper and
lower portions of the TV screen.
➜
16:9 (Wide screen mode): If you have a
widescreen TV set, use this setting (you must also
set your widescreen TV to "full size") available on
a disc, then the disc's own preference will be
used.
PASSWORD
You can enter your four-digit password to
activate or deactivate rating control. The default
password is "0000".
➜
"
" is displayed if rating control is activated.
➜
"
" is displayed if rating control is
deactivated.
RATING
1
Press 5/4 to highlight "RATING".
2
Enter its submenu by pressing 3.
3
Use 5/4 to highlight a rating level for the disc
inserted.
➜
DVDs that are rated above the level you
selected will not play unless you enter your four-
digit password and choose a higher level rating.
23
Advertisement
Table of Contents
