Assembly; Removing The Lid; Fitting The Lid - Adesso CH-1101 Instruction Manual

CH-1101

ASSEMBLY

The Mini chopper is assembled from four components - the
motor body, bowl, lid and blade assembly.
Always disconnect mains power before assembly or disassembly
of the chopper.

Removing the lid

To remove the lid, twist the handle anti-clockwise and lift it off.

Fitting the lid

To re-fit the lid, place
the lid on the bowl as
shown, then turn the
lid clockwise to lock it
in place.
When correctly fitted,
the pointer on the lid
will line up as shown.
NOTE: The lid will only fit on the bowl in one position, never force
it into place. If the lid is not fully locked, the chopper will not
operate. This is a safety feature.
PAGE 6