Download Print this page
Stamford AS440 Conversion Instructions

Stamford AS440 Conversion Instructions

Fitting as440 avr in place of sx440 avr

Advertisement

Quick Links

AVR CONVERSION INSTRUCTIONS
Fitting AS440 AVR in place of SX440 AVR.
Read all instructions carefully before starting this conversion.
Check that all the parts listed below are included with this conversion kit.
Depending upon the type of machine being converted, not all the parts listed will be
required.
No specialised tools are necessary.
Contents:
Item.
Description.
1
Conversion instructions (this sheet)
2
AS440 AVR
3
AS440 AVR specification sheet
4
Terminal block (6-way)
5
Fixing Screw
6
Grommet
7
AVR adjustment label
8
AVR adjusting tool
9
Cable-tie
SAFETY
WARNING
Service and fault-finding procedures present
hazards which can result in injury or death.
Only personnel qualified to perform electrical
and mechanical service who are familiar with
the
equipment
should
procedures.
WARNING
Ensure
engine
disabledand
the
generator
isolated
before
commencing
maintenance procedures.
Isolate any anti-condensation heater supply.
©2007
carry
out
these
starting
circuits
are
is
electrically
service
Part No.
SP_SX440_AS440_07.07_01_GB
E000-24400
TD_AS440 AVR_11.06_03_GB
450-15489
005-04068
003-25161
E00-14064
E00-10032
052-45003
It is essential that all instruments are regularly
checked for safety, and any connection leads,
probes or clips checked to ensure that they are
suitable for the voltage levels being tested.
Never attempt to test a generator when the
engine is running (LIVE) unless there is another
competent person present who can switch off
the power supply and shut down the generator
in an emergency.
Never expose electrical components with the
power on (LIVE) without creating a safe working
area around you. Make sure you have made all
or
other persons, in the immediate area, fully
aware of what you are doing.
These instructions have been written for use
with the AVR specification as originally supplied
with the generator.
Qty.
1
1
1
1
1
1
1
1
5
SP_SX440-AS440_07.07_01_GB
check

Advertisement

loading
Need help?

Need help?

Do you have a question about the AS440 and is the answer not in the manual?

Questions and answers

Summary of Contents for Stamford AS440

  • Page 1 AVR CONVERSION INSTRUCTIONS Fitting AS440 AVR in place of SX440 AVR. • Read all instructions carefully before starting this conversion. • Check that all the parts listed below are included with this conversion kit. • Depending upon the type of machine being converted, not all the parts listed will be required.
  • Page 2 STEP 2 Preparing the new AS440 AVR. Link terminals on the new AS440 AVR Fig 2 : Preparing the new AS440 AVR. [item 2] as follows and as shown in Fig 2. Use the AVR adjustment label [item 7] to...
  • Page 3 AVR. STEP 4 Reconnecting. Connect leads to the new AS440 AVR [item 2] as shown in Fig 4. Pass all these leads through the grommet [item 6] Lead P3 to AVR terminal 7. Lead P2 to AVR terminal 8.
  • Page 4 Fig 4 : New wiring for the AS440 AVR. STEP 5 Final check & adjustments. CAUTION Check all wiring connections. Before you start the generator: The AVR has been factory set and might not be adjusted to suit your particular Make sure you have made all other persons in requirements.

This manual is also suitable for:

Sx440