Remote Control; Connecting The Remote To A Switch - RUSTA 92201069 Manual

ENG
Thank you for choosing to
purchase a product from Rusta!

Remote control

Read the user manual carefully to make sure that the product is assembled, used and
maintained correctly, as described in the instructions in this user manual. Keep the user
manual for future reference.
1. Insert the switch you wish to connect to
your remote control into the power point.
2. The LED on the switch will flash for
10 seconds. During this time, you can connect
the switch to your remote control. If you wait
longer, the LED will turn off. If this happens,
remove your switch from the power point for
a few seconds to reset it.
CONNECTING YOUR REMOTE CONTROL TO A SWITCH
• You can connect up to four remote controls to your switch.
• Press one of the left ON buttons on the remote control
to connect the switch to one of the four channels of the
remote control (ABCD). The LED on the switch will not stay
lit (2). The switch is now connected to the remote control.
2
Read through the entire manual
before installation and use!