Get Started; Connect Speakers; Connect Fm Antenna; Connect Power - Philips DCM378/12 User Manual

3 Get started

Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the model
and serial number of this apparatus. The model
number and serial number are on the bottom of the
apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Connect speakers

Note
•
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifications section of this manual.
1
Insert the speaker wires completely into the
speaker input sockets on the back of the unit.
10 EN

Connect FM antenna

Tip
•
For optimal reception, fully extend and adjust the
position of the antenna.
•
For better FM stereo reception, connect an outdoor FM
antenna to the FM ANTENNA socket.
•
The unit does not support MW radio reception.
1
Connect the supplied FM antenna to the FM
ANTENNA socket on the main unit.

Connect power

Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•
Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•
Before you connect the AC power cord, ensure that you
have completed all other connections.