Product Information; Other Features; Set Alarm Timer; Set Sleep Timer - Philips DCM377/05 User Manual

7 Other features

Set alarm timer

This unit can be used as an alarm clock. You can select
CD, iPod/iPhone, iPod/iPhone playlist, FM or USB as
alarm source.
Note
Make sure that you have set the clock correctly.
1
In standby mode, press and hold TIMER until
[SET TIMER] (set timer) scrolls on the display.
» [SELECT SOURCE] (select source) scrolls
on the screen.
2
Press SOURCE repeatedly to select a source:
CD, FM, USB, iPod/iPhone or iPod/iPhone
playlist.
If iPod/iPhone playlist is selected as alarm
source, you need create a playlist called
"PHILIPS" in your iPod/iPhone.
If no playlist called "PHILIPS" is created
in the iPod/iPhone or no track is stored
in the playlist, the unit switches to iPod/
iPhone alarm source.
3
Press TIMER
»
The hour digits are displayed and begin to
blink.
4
Press / repeatedly to set hour, then press
TIMER
»
The minute digits are displayed and begin
to blink.
5
Press / to set minute, then press TIMER to
» VOL (volume) is displayed and begins to
blink.
6
Press / to adjust volume, then press
TIMER
»
A clock icon is displayed.
Activate/deactivate alarm timer
1
In standby mode, press TIMER repeatedly to
activate or deactivate timer.
»
If timer is activated,
Tip
Alarm timer is not available in MP3 LINK mode.
If CD/USB/iPod/iPhone source is selected, yet no disc is
placed or no USB/iPod/iPhone connected, the system
switches to the tuner source automatically.
14 EN
is displayed.

Set sleep timer

1
When the unit is turned on, press SLEEP
repeatedly to select a time period (in minutes).
»
When sleep timer is activated,
displayed.
»
To deactivate sleep timer, press
until disappears.

Listen to external audio device

You can listen to an external audio device such as
MP3 player through this unit.
1
Connect the audio device.
For audio device with red/white audio
output sockets:
Connect a red/white audio cable (not
supplied) to the AUX IN sockets and to
the audio output sockets on the audio
device.
For audio device with headphone
sockets:
Connect the supplied MP3 Link cable
to the MP3 LINK socket and to the
headphone socket on the audio device.
2
Select MP3 LINK/AUX source.
3
Play the device.

Listen through headphone

1
Plug a headphone into the
unit.

8 Product information

Note
Product information is subject to change without prior
notice.
Rated Output Power
Frequency Response
Signal to Noise Ratio
Aux Input
is
SLEEP again
socket on the
2X50W RMS
30Hz-20kHZ
1V RMS 20kohm