Play Audio From An External Device; Listen Through Headphone; Turn On/Off Automatically - Philips MCD135/58 User Manual

Tune to a programmed radio station
1
Press TUNER.
2
Press / (or / ) repeatedly to select
a programmed radio station.
Play audio from an external
device
You can use this player to play audio from an
external device.
1
Connect the MP3 link cable to
• the MP3 LINK jack of this player
• the audio output jack (usually
headphone jack) of the external
device.
2
Press MP3-LINK.
3
Play the external device (see the user
manual of this device for details).

Listen through headphone

Plug a headphone into the

Turn on/off automatically

You can set a time for automatic power on and
off.
Note
• Make sure that you have set the clock before
this setup.
1
In standby mode, press and hold SLEEP/
TIMER.
»
(time for auto power on)
blinks.
2
Press SLEEP/TIMER.
»
The hour digits blink.
3
Press / to set the hour.
16 EN
socket.
4
Press SLEEP/TIMER again.
»
The minute digits blink.
5
Press / to set the minute.
6
Press SLEEP/TIMER to confirm the time
for auto power on.
»
blinks.
»
If you want to set the power-off time,
press / to select
auto power off), and then repeat steps
2-6.
7
Press / to select
8
Press SLEEP/TIMER.
9
Press / to select a media source
(DISC, USB, or FM).
• For the tuner source, you still
need to press / to select a
programmed radio station.
10
Press OK.
»
The clock time is displayed.
11
Press SLEEP/TIMER to activate the timer.
»
is displayed.
»
The player turns on/off at the set time.
• To deactivate the timer, press
TIMER again.
Use the sleep timer
The player can also turn off automatically
after a preset period (10-90 minutes with an
interval of 10 minutes).
1
During play, press SLEEP/TIMER
repeatedly to select a period.
»
S L E E P
is displayed.
2
To deactivate the sleep timer, press
SLEEP/TIMER repeatedly until
is displayed.
O F F T I M E
(time for
S O U R C E
.
SLEEP/
S L E E P O F F