Get Started; Connect Speakers; Connect Fm Antenna; Connect Power - Philips MCM3000/12 User Manual

3 Get started

Caution
• Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________

Connect speakers

Note
•
For optimal sound, use the supplied speakers
only.
•
Connect only speakers with impedance that is
the same or higher than the supplied speakers.
Refer to the Specifications section of this
manual.
Insert the speaker wires completely into the
speaker input sockets on the back of the unit.
AUX IN
L
R
10 EN
ANTENNA
FM
AC MAIN ~

Connect FM antenna

Tip
• For optimal reception, fully extend and adjust
the position of the antenna.
Connect the supplied FM antenna to the FM
ANTENNA socket on the main unit.

Connect power

Caution
•
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
•
Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
•
Before you connect the AC power cord,
ensure that you have completed all other
connections.
Connect the power cable to:
• the AC MAIN~ jack on the main
unit.
• the wall socket.
AUX IN
ANTENNA
L
FM
R
AC MAIN ~
AC MAIN ~