Advertisement

Quick Links

How to assemble the Allegro® Reformer
PARTS LIST
Part number
Quantity
950-002
1
950-020
1 kit
950-007
1 pair
GEN8000
2
210-026
1 pair
101-008
1 pair
950-081
2
GEN9050
1
ALL0060
1
SPR9070
3
SPR9071
1
SPR9241
1
DVD8121
1
Description
Complete footbar
Pivot bolts and washers
Shoulder rest with brackets
Twist lock plunger knobs
Ropes
Double loops
Allegro riser with pulley
5/16" Allen wrench
Allegro wrench
Red spring
Blue spring
Yellow spring
Introductory DVD
IMPORTANT PRECAUTIONS:
PLEASE READ WARNING
To reduce the risk of serious injury, read the following
important precautions before using the Allegro.
» Read all instructions in this manual before using the
Allegro. Review the Setup and Safety video included with
the Allegro before using the equipment. Use the Allegro
only as described in these instructions and the video.
» It is the responsibility of the owner to ensure that all users
of the Allegro are adequately informed of all precautions.
» Use the Allegro only on a level surface. Keep hands and
feet away from all moving parts. When the Allegro is
not in use, leave at least two springs connected to the
carriage. Keep children under the age of 12 and pets away
from the Allegro at all times.
» If you feel pain, dizziness, or shortness of breath, stop
exercising immediately.
» Before beginning any exercise program, consult your
physician.
11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Reformer and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Allegro Reformer

  • Page 1 How to assemble the Allegro® Reformer PARTS LIST Part number Quantity Description IMPORTANT PRECAUTIONS: 950-002 Complete footbar PLEASE READ WARNING 950-020 1 kit Pivot bolts and washers To reduce the risk of serious injury, read the following 950-007 1 pair Shoulder rest with brackets important precautions before using the Allegro.
  • Page 2 INSTALL THE SHOULDER RESTS INSTALL THE BLACK PLUNGER KNOBS 1. Remove the locking pins on each side of the headrest. Note 2. Screw the plunger knob into the large hole until it is the two protruding studs on the bottom of the shoulder rests. completely threaded through the trunnion plate.
  • Page 3 » Repair any tears in the upholstery with an upholstery repair kit of the Reformer frame. Raise available at auto parts stores, or have the repair done locally. the footbar to its highest Call Balanced Body for other upholstery and re-upholstery position.

Table of Contents