6 Other features
Set the alarm timer
This unit can be used as an alarm timer. You can
select CD, FM, iPod/iPhone, or USB as alarm
source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold TIMER
until [SET TIMER] (set timer) scrolls on the
display.
» [SELECT SOURCE] (select source) is
displayed.
2
Press SOURCE repeatedly or the source
selection buttons on the remote control
to select a source: disc, FM, iPod/iPhone,
or USB.
3
Press TIMER to confirm.
» The hour digits blink.
4
Press
/
repeatedly to set the hour.
5
Press TIMER to confirm.
» The minute digits blink.
6
Repeat steps 4-5 to set the minute and
alarm volume.
Note
•
If no button is pressed in 90 seconds, the unit exits
alarm setting mode automatically.
•
If iPod/iPhone is selected as alarm source, and you have
created a playlist called "PHILIPS" in iTunes and import
it to your iPod/iPhone, you will wake to a random track
in the playlist.
•
If no "PHILIPS" playlist is created in the iPod/iPhone or
no track is stored in the playlist, you will wake to your
last listened track in the iPod/iPhone.
EN
16
Activate/deactivate the alarm timer
In standby mode, press TIMER repeatedly to
activate or deactivate the alarm.
» If the alarm timer is activated,
displayed.
Tip
•
If CD/USB/iPod source is selected, yet no disc is
inserted or no USB/iPod/iPhone connected, the unit
switches to the tuner source automatically.
Set the sleep timer
Note
•
Make sure that you have set the clock correctly.
When the unit is turned on, press SLEEP
repeatedly to select the sleep timer period (in
minutes).
» If the sleep timer is activated,
Tip
•
To deactivate the sleep timer, press SLEEP repeatedly
until [OFF] (off) is displayed.
Play from an external device
You can also listen to an external audio device
through this unit.
1
Connect the MP3 link cable (not supplied)
to:
• the MP3 LINK socket (3.5mm) on the
unit.
• the headphone socket on an external
device.
2
Press MP3 LINK to select the MP3 link
source.
is
is displayed.