Troubleshooting - Philips DC910/37B User Manual

WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or Philips for
help.
Problem
Radio reception is poor.
The system does not react when buttons
are pressed.
Sound cannot be heard or is of poor
quality.
The remote control does not function
properly.
The timer is not working.
The Clock/Timer setting is erased.
Some files on the USB device are not
displayed.
"DEVICE NOT SUPPORTED" scrolls on the
display.

Troubleshooting

Solution
✔
If the signal is too weak, adjust the antenna for
better reception.
✔
Increase the distance between the Micro HiFi
System and your TV or VCR.
✔
Remove and reconnect the AC power plug and
switch on the system again.
✔
Adjust the volume.
✔
Select the source (iPod or TUNER, for example)
before pressing the function button (É Å,
6
).
✔
Reduce the distance between the remote
control and the system.
✔
Insert the battery with its polarities
(+/– signs) aligned as indicated.
✔
Replace the battery.
✔
Point the remote control directly toward
IR sensor on the front of the system.
✔
Set the clock correctly.
✔
Switch on the timer.
✔
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
✔
Check if the number of folders exceeds 99 or
the number of titles exceeds 400.
✔
Remove the USB mass storage device or select
another source.
5 /
23