TMC REEF EASI-Dose Instructions For Installation And Use Manual page 8

7. Insert a hosing connector (7) (with black dust protector removed) into the outlet (5) on
the left side of the dosing pump head (2) and connect another length of silicone hosing to
the other end. Place the end of this length of hosing in your desired dosing location e.g.
your sump, ensuring there are no kinks or sagging. Secure as required.
Useful Tip: We recommend the use of the EASI-Dose hosing clamp (sold separately - please
see back page for details) to ensure a neat and secure set up.
8. Ensure all connections are tightly secured and that the EASI-Dose unit is installed correctly
before operating. Failure to do so could result in leaks or operating problems.
9. Repeat the above steps for each dosing pump head you wish to use.
Expanding Your Easi-dosE dosing sYstEM
The EASI-Dose Dosing System is expandable and allows two EASI-Dose Slave units (4 pumps
each) to be connected and independently controlled from the Master system (EASI-DOSE 1, 2
or 3) giving you up to 8 additional pumps.
If you wish to expand your EASI-Dose Master system, simply connect an EASI-Dose Slave
(sold separately) to your Master system by inserting one end of the the slave connection cable
(9 - supplied with Slave unit only) into the INPUT socket on the Slave and the other end into
either extension port A or B (11 or 12) on the back of the EASI-Dose Master system. Once
connected the Master system will power and automatically recognise the Slave unit and you
will be able to programme from the Master.
Complete the installation points above for each pump that you wish to use.
5