Connecting The Projection Panel To A Macintosh Series Computer - Black Box AC400A Owner's Manual

REAL COLOR AND MONOCHROME 16 LCD PROJECTION PANEL
3.4 Connecting the Projection Panel
to a Macintosh Series Computer
Figure 3-6 shows how to connect the
Projection Panel to a Macintosh
series computer.
Because classic-style Macintosh
computers do not have a video
connector, you must install an
internal adapter. The Macintosh
128, 512, and Plus require an A10
adapter. The SE and SE/30 require
an A20. The Macintosh Classic
requires an A21. Call your dealer for
more information. Note that the
short end of the loop-through cable
is not connected in this installation.
14
Fig. 3-6. Macintosh Series Computer.
NOTE
Because the SE and Plus
models of the Macintosh
computer only display in
monochrome at a resolution
of 512x342 pixels, a Real
Color 16 LCD Projection
Panel connected to one of
these models will only
project monochrome and will
not fill the entire Projection
Panel screen.