Black Box AC400A Owner's Manual page 10

3.1.1 C
ABLES
Three cables are supplied with the
Projection Panel:
1. A Macintosh II/Macintosh
LC/Apple IIGS loop-through
cable
2. A VGA/MCGA loop-through
cable
3. A loop-through cable for EGA,
CGA, or Macintosh video
15-pin MacII
The cables that come with your
Projection Panel are used to connect
the computer's video port to the
Projection Panel and the monitor.
Each of the three cables has a 26-pin
connector for the Projection Panel,
a connector matching the video card
and a connector for the monitor.
The Projection Panel receives the
computer's signals, amplifies the
signals, and sends them out to the
monitor.
15-pin VGA
Fig. 3-2. Cables.
CHAPTER 3: Installation
9-pin VGA
9