Radiant Optics HotZone 1500W Installation Instructions

Warranty

Radiant Optics Mfg., LLC warrants to the original purchaser that this new
replacement element will be free from defects in material or workmanship for 180 days from the date of
purchase. This warranty of material and workmanship specifically excludes labor; merchantability;
installations not made in accordance with these installation instructions and/or the original heater
Installation Instructions; malfunctions or failures due to misuse, negligence, alteration or accident;
operation that varies from the original operating instructions; labor, loss of time, or inconvenience; loss
of use of, or damage to, the original heater and other consequential damages. Repair or replacement will
be at the sole discretion of Radiant Optics Mfg., LLC. This warranty constitutes the sole remedy of failure
to the purchaser.

Important Instructions

1. Installation requires competent, qualified personnel to prevent the risk of electrocution, injury, fire
and/or property damage;
2. Follow all OEM installation and operating instructions and precautions.
- Per OEM instructions, keep combustible materials at least 5 ½ feet from the front of the heater.
- To minimize risk of failure or fire, ensure heater is installed with the junction box on the low side.
3. Ensure all hardware used is rated for high temperature (>900
4. This replacement element for use in HotZone ELE and HZE heaters and is not suited for any other use.
WARNING: RISK OF FIRE OR ELECTRIC SHOCK. Qualified personnel required for installation.
WARNING: RISK OF FIRE. Do not use near combustible materials.
Radiant Optics Mfg., LLC
HotZone
Replacement Element

Installation Instructions

Radiant Optics Mfg, LLC
7683 SE 27
Mercer Island WA 98040
o
F).
1
Revision 092019
1500W
TM
th
Street #114
(425) 806-3990
Radiantoptics.com
(425) 806-3990