Model Designation; Engine Identification; Model And Serial Number Location - BRP Evinrude E-TEC G2 150 HP Installation & Predelivery Manual

Introduction

Model Designation

Model Designation

Engine Identification

ENGINE FAMILY
IDENTIFICATION:
A Alternate Feature*
C 66° V6 G2 Models
E 74° V6 G2 Models
C 150 PLH AB A
* Refer to Model Tables under Models Covered on p. 11.

Model and Serial Number Location

Model and serial numbers are located on the swivel bracket and on the powerhead.
150 – 200 HP 66° V6 (2.7 L) Models
1. Model and serial number
2. Serial number
10
DESIGN FEATURES:
C Counter Rotation
F Dynamic Power Steering (DPS)
H High Output
O Integrated Hydraulic Steering
(IHS)
P Cable Steering
U 300 HP with Water Valve
SHAFT LENGTH:
L 20 in. (508 mm)
X 25 in. (635 mm)
Z 30 in. (762 mm)
HORSEPOWER
1
MODEL IDENTIFICATION
The first two characters identify
Model Version:
AA A First major variant
AB A Second major variant
AF A Third major variant
•
follow the model identification shown
above.
•
subsequent versions continue through the
alphabet as AG, AH etc.
•
will not use letters from the word
INTRODUCES to identify models.
The third character identifies
Model Revision:
AA A First revision
AA B Second revision
Subsequent revisions continue through the
alphabet in order (A through Z).
2
009146
010199