Summary of Contents for Tucker Barbecues R Class Series
Page 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS FOR R CLASS SERIES CABINET/TROLLEY SHELVES MODELS: R1, R3, R4, R5, R6, RSS, R4 SS, R5 SS IMPORTANT – PLEASE READ ALL INSTRUCTIONS BEFORE YOU ASSEMBLE, INSTALL OR OPERATE THIS APPLIANCE. V05.12.19...
CABINET/TROLLEY SHELF ASSEMBLY INSTRUCTIONS TOOLS REQUIRED FOR ASSEMBLY • Remove any plastic film protecting or covering any parts of the Shelves before assembly. Phillips head screwdriver • Cut away any packaging or cable ties that may be holding components in place. •...
Page 4
CABINET/ TROLLEY SHELF ASSEMBLY 1. Fitting the side shelves to the R Class cabinet trolley, with the side shelf internal mounting brackets there is a left and a right bracket of which they need to mirror each other. 2. These have to be fitted to the internal face of the cabinet trolley before the installation of the BBQ.
Page 5
5. Using the long bolts provided with the BBQ, 7. Now use 2 bolts to secure one shelf bracket we need to bolt the BBQ into the cabinet to the side and Locate the pin on the trolley to secure it. external bracket into the side shelf then attach one of the brackets first, The long bolts go into the counter 4 sunk...
Page 6
8. Attach the second bracket using the top bolt, only allowing the bracket to swing If Installing a Tucker Wok burner to the side inward to allow you to secure the pin into shelf you have to: the shelf before tighten the second bracket 1.
WARRANTY WARRANTY 5. Proof of purchase together with this warranty must be provided to verify purchase date and establish the warranty period. Only WARRANTY PERIOD the original purchaser is covered under this warranty. 10 years Stainless steel Shelves 6. Where this warranty is inconsistent with any state laws, the rights of the purchaser shall NOT COVERED prevail.
Need help?
Do you have a question about the R Class Series and is the answer not in the manual?
Questions and answers