Storing The Pager Code - Black Box FX800A User Manual

5.3 Storing the Pager Code

Before you can use the Tone Pager or Vibrating/Tone Pager, you must
designate a pager code for each of the pagers.
You must reset all pager codes when you enter a new system code.
To enter and save a pager code, follow these steps:
1. Turn the pager OFF.
2. Press and hold the ON/OFF switch, then slide it to the ON position (see
Figure 5-2. Pager ON/OFF Switch.
NOTE
ON OFF
CAMPUS PAGER
22