17 CIVIC 5D (KE KG)-32TGG6000.book 600 ページ 2017年10月20日 金曜日 午前11時49分
uuWhen DrivinguBlind spot information (BSI) System
■
When the system detects a vehicle
Comes On
Blinks
* Not available on all models
600
*
BSI Alert Indicator:
Located on the outside rearview mirror on
both sides.
Comes on when:
• A vehicle enters the alert zone from behind
to overtake you with a speed difference of
no more than 50 km/h (31 mph) from your
vehicle.
• You pass a vehicle with a speed difference
of no more than 20 km/h (12 mph).
Blinks and a beeper sounds when:
You move the turn signal lever in the direction
of the detected vehicle. The beeper sounds
three times.
*
1Blind spot information (BSI) System
BSI may be adversely affected when:
•
Objects (guard rails, poles, trees, parked vehicles,
building, wall, etc) are detected.
•
An object that does not reflect radio waves well,
such as a motorcycle, is in the alert zone.
•
Driving on a curved road.
•
A vehicle is moving from a far lane to the adjacent
lane.
•
The system picks up external electrical interference.
•
The rear bumper or the sensors have been
improperly repaired or the rear bumper has been
deformed.
•
The orientation of the sensors has been changed.
•
In bad weather (rain, snow, and fog).
•
Driving on a bumpy road.
•
Making a short turn that slightly tilts the vehicle.
For a proper BSI operation:
•
Always keep the rear bumper corner area clean.
•
Do not cover the rear bumper corner area with
labels or stickers of any kind.
•
Take your vehicle to a dealer if you need the rear
bumper corner area or the radar sensors to be
repaired, or the rear bumper corner area is strongly
impacted.