17 CIVIC 5D (KE KG)-32TGG6000.book 116 ページ 2017年10月20日 金曜日 午前11時49分
uuIndicatorsu
Indicator
Name
System Message
Indicator
Auto High-Beam
Indicator
*
*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
116
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
(
w
*1
, then goes off.
Comes on along with a beep when a
●
problem is detected. A system
message on the driver information
interface appears at the same time.
Comes on when all the operating
●
conditions of the auto high-beam are
met.
Explanation
While the indicator is on, press the
●
(display/information) button to see the
message again.
Refer to the Indicators information in this
●
chapter when a system message appears
on the driver information interface.
Respond to the message accordingly.
The driver information interface does not
●
return to the normal screen unless the
warning is cancelled, or the
is pressed.
2 Auto High-Beam
*
P. 229
Message
—
button
—