Advertisement
Quick Links
Q45VA Bracket Assembly Quick Start Guide
Install the BWA-BK-009 Bracket Assembly on the Q45VA
Read these instructions before using your Sure Cross radios. Do not discard these instructions. For more detailed information
about installing and using your Sure Cross products, download and read the Sure Cross Wireless I/O Network Manual (p/n
132607
).
Equipment (included in BWA-BK-009 bracket assembly):
•
Screw Retainers (2)
•
Base Plate (1)
•
Phillip head Screws (4)
•
Set Screw (1)
•
Disc (1)
Recommended (not included) items:
•
262 Series Loctite (hardens after 10 minutes, full core hardens after 24 hours) or an equivalent glue
•
Urethane or Epoxy able to withstand environment's temperature range (see step 9.)
Final Assembly
1. Flip the Q45VA upside down.
2. Insert the screw retainers into the two slots of the device and align the screw holes with the holes at the bottom of the
Q45VA.
Original Document
208986 Rev. B
BWA-BK-009 Bracket and Q45VA Assembly Exploded View
6 December 2018
208986
Advertisement
Related Manuals for Banner BWA-BK-009
Summary of Contents for Banner BWA-BK-009
- Page 1 Q45VA Bracket Assembly Quick Start Guide Install the BWA-BK-009 Bracket Assembly on the Q45VA Read these instructions before using your Sure Cross radios. Do not discard these instructions. For more detailed information about installing and using your Sure Cross products, download and read the Sure Cross Wireless I/O Network Manual (p/n...
- Page 2 Q45VA Bracket Assembly Quick Start Guide 3. Position the base plate on the bottom of the Q45VA so that the four counterbores face up and the alignment mark faces the front of the Q45VA. Align the counterbores with the holes at the bottom of the device. 4.
- Page 3 Q45VA is mounted to the disc. 10. After the recommended adhesive that mounts the disc to its mounting surface has dried, apply Loctite to the set screw. 11. Screw the Q45VA back onto the disc. © Banner Engineering Corp. All rights reserved...