Sharp KS-1800 Service Manual page 7

1. Remove the bottom cover in accordance with "REMOVE OF BOTTOM COVER".
2. Remove 2 screws holding lead wires to the heater plate ass'y.
3. Remove 3 screws holding the heater plate ass'y to the outer pot.
4. Now the heater plate ass'y is free.
1. Remove the bottom cover in accordance with "REMOVE OF BOTTOM COVER".
2. Disconnect the lead wire of the control panel from the heater plate and thermostat.
3. Remove the screw holding the control panel.
4. Detach the control panel from the body.
5. Now the control panel assembly is free.
REMOVE OF HEATER PLATE ASSEMBLY
REMOVE OF CONTROL PANEL ASSEMBLY
Remove
Heater plate ass'y
Screw
Outer pot
Screw
Fig. 5
Fig. 6
7
Body
Control panel
Assembly
Screw