Advertisement
1
Connect the AC power adaptor of the system.
Setting the clock
1
In standby mode, press and hold
2
Press
(or
VOLUME +/-
between 12 hour and 24 hour display.
3
Press
PROG/SET TIME
➜
The clock digits flash on the display panel.
4
Press
(or
VOLUME +/-
5
Press
PROG/SET TIME
➜
The clock digits for the minutes flash.
6
Press
(or
VOLUME +/-
set the minutes.
7
Press
PROG/SET TIME
POWERFUL BASS
PROG/SET TIME
on the remote control) to switch
VOL +/-
on the remote control again to confirm.
on the remote control) to set the hours.
VOL +/-
on the remote control again.
on the remote control) to
VOL +/-
on the remote control to confirm the time.
on the remote control.
Tip
– See the User Manual on how to
connect other equipment to this
system.
– Use the supplied AC power
adaptor only! Using any other
power connection device may
damage your main set!
POWERFUL BASS
1
Advertisement
