Advertisement
Quick Links
Advertisement
Related Manuals for Nitto ATRA ACE CLA-2720
Summary of Contents for Nitto ATRA ACE CLA-2720
-
Page 3: General Safety Rules
If there is any damage to the machine, Glasses only for visual correction are not appropriate take it to an authorized Nitto dealer for repair. to be used as safety glasses. Do not attempt service or repair of the drilling ●... -
Page 4: Safe Handling
● work. Avoid heavy-duty work that is the beyond the operate the machine. Take it to an authorized Nitto capacity of your drilling machine. If the work exceeds Dealer for repair. - Page 5 atmospheres, such as in the presence of Disconnect the battery pack from the power tool ● flammable liquids, gases or dust. Power tools before making any adjustments, changing create sparks which may ignite the dust or fumes. accessories, or storing power tools. Such preventive safety measures reduce the risk of Keep children and bystanders away while ●...
- Page 6 Nitto described in the instruction manual and ● If the liquid of the battery pack leaks and gets into catalog. Use of a battery pack not specified by Nitto your eyes, do not rub your eyes but immediately may cause machine failure, injury or damage.
- Page 9 Do not discard the battery pack with normal The color of LED changes according to the load ● ● garbage or place in fire. of the electric drill. Use it with LED in green or yellow. Keep the battery pack out of the reach of children. LED turns green or yellow when the load of the ●...
-
Page 10: Name Of Parts
1 USAGE This is a machine tool which attaches magnetically to mild steel and uses the power of Drill Motor to drill holes with JETBROACH One-touch type or HI-BROACH One-touch Type. 2 CHECK THE CONTENTS OF THE PACKAGEKAGE Check the contents and make sure that the tool is not damaged due to an accident during the transportation, if any. The contents should correspond to the list as follows. - Page 13 6 PREPARATIONS WARNING Turn the magnet switch off and detach the battery pack from the machine when preparing. ● 6-1 Attaching handle Ass’y <Attachment and detachment of handle Ass’y > 1. How to attach the handle Ass’y - Insert the sleeve of the handle Ass’y in the pinion shaft while the sleeve is pulled toward the handle. (Fig. 13) - After it is attached, check that the handle Ass’y will not be detached before use.
- Page 15 CAUTION soap and water. Soiled clothing should be removed and laundered thoroughly before re-use. If there is (1) Use Nitto genuine blue Cutting Oil. inflammation, consult a physician and follow the Cutting performance and life may be reduced when other instructions.
-
Page 20: Troubleshooting
8 TROUBLESHOOTING encountered, eliminate it by uniformly re-tightening the four Slide Board adjustment screws on the WARNING lateral side of the body to the extent that the Drill Motor will not fall under its dead weight. The screws Do not attempt to repair the tool by yourself. ●... -
Page 22: Ordering Service Parts
10 ORDERING SERVICE PARTS CAUTION In ordering parts and components from the sales agent Pay attention to prevent jamming (hooking) of the ● from whom you purchased the tool or an authorized lead line (pig tail) with the brush holder when dealer, give each part number, parts name and quantity attaching a new carbon brush. - Page 23 10-5 Ordering parts Jetbroach One-touch Type (metric sizes) Part No. Diameter × Depth (mm) PILOT PIN Part No. Diameter × Depth (mm) PILOT PIN TK01148 X 25 TK00308 X 35 TK01149 X 25 TK00309 21.5 X 35 TK01150 X 25 TK00310 X 35 TK01151...
- Page 25 13 ATRA ACE CLA-2720 PARTS LIST The part numbers with ( ) are included in the Ass'y parts written above them. No. Part No. Part Name Q'ty Price No. Part No. Part Name Q'ty Price TQ10547 Y Packings NB-15X19X1 TP06390...
Need help?
Do you have a question about the ATRA ACE CLA-2720 and is the answer not in the manual?
Questions and answers