Download Print this page

VinylWorks 2008AF Manual

Step entry system c/w gate

Advertisement

Quick Links

IMPORTANT INSTRUCTIONS: Read all instructions carefully & completely to become familiar with
IMPORTANT INSTRUCTIONS
IMPORTANT INSTRUCTIONS
IMPORTANT INSTRUCTIONS
parts, assembly, safety and proper use of this product. Failure to follow these instructions may
parts, assembly, safety and proper use of this product. Failure to follow these instructions may
parts, assembly, safety and proper use of this product. Failure to follow these instructions may
parts, assembly, safety and proper use of this product. Failure to follow these instructions may
result in serious personal injury. SWIM RESPONSIBLY & SAFELY !
result in serious personal injury. SWIM RESPONSIBLY & SAFELY !
result in serious personal injury. SWIM RESPONSIBLY & SAFELY !
result in serious personal injury. SWIM RESPONSIBLY & SAFELY !
TOOLS REQUIRED: 7/16" socket
TOOLS REQUIRED
: 7/16" socket - - - - nut driver or wrench, measuring tape, Phillips (star) screwdriver,
TOOLS REQUIRED
TOOLS REQUIRED
: 7/16" socket
: 7/16" socket
utility knife (trimming knife), 1/4" drill bit, drill & pad lock
utility knife (trimming knife), 1/4" drill bit, drill & pad lock
utility knife (trimming knife), 1/4" drill bit, drill & pad lock
utility knife (trimming knife), 1/4" drill bit, drill & pad lock
SAFETY INSTRUCTIONS & PROPER USE - - - - ASSEMBLY & INSTALLATION
SAFETY INSTRUCTIONS & PROPER USE
SAFETY INSTRUCTIONS & PROPER USE
SAFETY INSTRUCTIONS & PROPER USE
This pool step entry system has a 300 lb load capacity - - - - one person
This pool step entry system has a 300 lb load capacity
This pool step entry system has a 300 lb load capacity
This pool step entry system has a 300 lb load capacity
This entry system is designed & intended for use with an above ground pool only
This entry system is designed & intended for use with an above ground pool only - - - - flat bottom pool
This entry system is designed & intended for use with an above ground pool only
This entry system is designed & intended for use with an above ground pool only
Your above ground pool has shallow water
Your above ground pool has shallow water
Your above ground pool has shallow water - - - - absolutely NO DIVING or NO JUMPING into the pool
Your above ground pool has shallow water
This product conform to the latest revisions of the APSP recommended standards for
This product conform to the latest revisions of the APSP recommended standards for
This product conform to the latest revisions of the APSP recommended standards for
This product conform to the latest revisions of the APSP recommended standards for
above ground/on ground swimming pool ladders
above ground/on ground swimming pool ladders
above ground/on ground swimming pool ladders
above ground/on ground swimming pool ladders
For entry & exit of the pool, face steps at all times
For entry & exit of the pool, face steps at all times
For entry & exit of the pool, face steps at all times
For entry & exit of the pool, face steps at all times
This system is designed for use by one person at all times
This system is designed for use by one person at all times
This system is designed for use by one person at all times
This system is designed for use by one person at all times
This system is designed with a protecting gate system
This system is designed with a protecting gate system
This system is designed with a protecting gate system
This system is designed with a protecting gate system - - - - NEVER use system without gate attached & fully functional.
When pool is not in use, make certain gate is securely closed, latched & locked (lock not included)
When pool is not in use, make certain gate is securely closed, latched & locked (lock not included)
When pool is not in use, make certain gate is securely closed, latched & locked (lock not included)
When pool is not in use, make certain gate is securely closed, latched & locked (lock not included)
Locate entry system on a solid base and free from high traffic areas around the pool
Locate entry system on a solid base and free from high traffic areas around the pool
Locate entry system on a solid base and free from high traffic areas around the pool
Locate entry system on a solid base and free from high traffic areas around the pool
Entry system
Entry system
Entry system
Entry system MUST
MUST
MUST be secured (bolted) to top rail of pool for greater stability and safety
MUST
be secured (bolted) to top rail of pool for greater stability and safety
be secured (bolted) to top rail of pool for greater stability and safety
be secured (bolted) to top rail of pool for greater stability and safety
Keep top platform and treads free from obstructions to avoid possible injury. Do not secure any items to the entry system.
Keep top platform and treads free from obstructions to avoid possible injury. Do not secure any items to the entry system.
Keep top platform and treads free from obstructions to avoid possible injury. Do not secure any items to the entry system.
Keep top platform and treads free from obstructions to avoid possible injury. Do not secure any items to the entry system.
Such objects (eg. thermometers, play toys, ropes) may create a potential for tripping or entrapment
Such objects (eg. thermometers, play toys, ropes) may create a potential for tripping or entrapment
Such objects (eg. thermometers, play toys, ropes) may create a potential for tripping or entrapment
Such objects (eg. thermometers, play toys, ropes) may create a potential for tripping or entrapment
NEVER ALLOW CHILDREN TO SWIM UNATTENDED
NEVER ALLOW CHILDREN TO SWIM UNATTENDED
NEVER ALLOW CHILDREN TO SWIM UNATTENDED
NEVER ALLOW CHILDREN TO SWIM UNATTENDED - - - - Nothing replaces parental supervision
Assemble and install this pool entry system as per the manufacturer's instructions. Do not deviate from these instructions
Assemble and install this pool entry system as per the manufacturer's instructions. Do not deviate from these instructions
Assemble and install this pool entry system as per the manufacturer's instructions. Do not deviate from these instructions
Assemble and install this pool entry system as per the manufacturer's instructions. Do not deviate from these instructions
Stringers - 2 Left & 2 Right
Step 1
Step 1
Step 1 - - - - Identify Parts
Step 1
Identify Parts
Identify Parts
Identify Parts
Top Platform - 1 pc
2.3
2.1
2.2
Identify the tread-riser (2 pc) with round pinch-off for in-pool light (2.1 - light is
optional). If using the OPT12V optional light with this step note proper position-
1
ing / location of this special tread-riser (2.2). The light should be placed in the
second riser down from the top of the step, below
stringer on flat surface with indentations to accept treads/risers facing up (as
shown above in "Parts"). Fit single bottom riser, with warning signs facing
2
forward, into bottom indentation (2.3) & snap into place making certain the button
lock tab of the riser passes through hole in stringer. Fit top tread, with anti-skid
surface facing upwards, into top indentation (2.4) & snap into place. Fold tread-
riser & fit into indentations above single riser (2.5). Make certain when folding
3
that the anti-skid surface is facing upwards (2.8). Repeat for remaining two tread-
risers - remember position of special tread (2.6 & 2.2) making certain all button
lock tabs protrude & lock in place (2.9). Place opposite stringer on top of treads-
4
risers (2.7) aligning indentations in stringer & button lock tabs with holes in
stringer. Snap stringer in place locking all tabs. Repeat for both sides of entry
Step 3 - - - - Add Weight to Stringers
Step 3
Step 3
Step 3
This entry requires additional weight for ballast & to prevent the unit from
floating. The top portion of the stringers are open, exposing the inside
cavity (3.1 & 3.2). This cavity is sealed and is designed to hold material for
weight. Put approximately ten pounds (10 lbs) of coarse
into both the left & right stringer of ONE SIDE
give the fully assembled system the required stability within the pool
water. Additional weight can be added if desired or if you find the system
requires greater stability. IMPORTANT - Remember which half has the
weight as you will require for Step 5 to follow
STEP
STEP
STEP
STEP ENTRY SYSTEM c/w GATE
ENTRY SYSTEM c/w GATE
ENTRY SYSTEM c/w GATE
ENTRY SYSTEM c/w GATE
: Read all instructions carefully & completely to become familiar with
: Read all instructions carefully & completely to become familiar with
: Read all instructions carefully & completely to become familiar with
nut driver or wrench, measuring tape, Phillips (star) screwdriver,
nut driver or wrench, measuring tape, Phillips (star) screwdriver,
nut driver or wrench, measuring tape, Phillips (star) screwdriver,
absolutely NO DIVING or NO JUMPING into the pool
absolutely NO DIVING or NO JUMPING into the pool
absolutely NO DIVING or NO JUMPING into the pool
Tread-Riser - 6 pcs
( * 2 SPECIAL * )
Gate Stop - 1 pc
Gate Hinges - 2 sets
(outer - larger)(inner - smaller)
Fit Treads
Fit Treads
Fit Treads
Fit Treads
& Risers
& Risers
& Risers
& Risers
Add Weight to Stringers
Add Weight to Stringers
Add Weight to Stringers
ONE SIDE
ONE SIDE
ONE SIDE / half of the entry. This will
MODEL 2008AF
MODEL 2008AF
MODEL 2008AF
MODEL 2008AF
ASSEMBLY & INSTALLATION
ASSEMBLY & INSTALLATION
ASSEMBLY & INSTALLATION
one person - - - - when properly installed
when properly installed
one person
one person
when properly installed
when properly installed
NEVER use system without gate attached & fully functional.
NEVER use system without gate attached & fully functional.
NEVER use system without gate attached & fully functional.
Nothing replaces parental supervision
Nothing replaces parental supervision
Nothing replaces parental supervision
Top Tread - 2 pcs
Bottom Riser - 2 pcs
Familiarize yourself with all parts before starting
assembly of the entry system. If you notice any parts
damaged or missing, contact our customer service for
help (877-VINYL WK)
Gate - 1 pc
2.4
below
below the surface of the water. Lay
below
Repeat for both sides of entry
Repeat for both sides of entry
Repeat for both sides of entry
coarse
coarse sand or gravel
coarse
3.1
flat bottom pool
flat bottom pool
flat bottom pool
Lower Handrails
2-Right & 2-Left
¾" " " "
1" " " "
3¼" " " "
2.5
2.6
3.2
Upper Handrails
2-Right & 2-Left
Hardware
Hardware
Hardware
Hardware
Measurement Guide
Measurement Guide
Measurement Guide
Measurement Guide
2.7
2.8
2.9

Advertisement

loading
Need help?

Need help?

Do you have a question about the 2008AF and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for VinylWorks 2008AF

  • Page 1 MODEL 2008AF MODEL 2008AF MODEL 2008AF MODEL 2008AF STEP STEP STEP STEP ENTRY SYSTEM c/w GATE ENTRY SYSTEM c/w GATE ENTRY SYSTEM c/w GATE ENTRY SYSTEM c/w GATE IMPORTANT INSTRUCTIONS IMPORTANT INSTRUCTIONS: Read all instructions carefully & completely to become familiar with...
  • Page 2 Step 4 Step 4 - - - - Attach Attach Step 4 Step 4 Attach Attach Upper Handrails Upper Handrails Upper Handrails Upper Handrails LEFT RIGHT Identify the upper RIGHT (R) & LEFT (L) handrails (small stamp in part - as shown in 4.2 above). Fit handrail pair together as shown in 4.1, 4.2 and 4.3 above , align bolt holes and secure using 1"...
  • Page 3 IDENTIFY PARTS certain you have all appropriate cartons and parts to complete your chosen pool entry system or deck assembly & installation (Model 2008AF - 2008CE or 2008G2D used with SD & FD decks). Familiarize yourself with all parts and read instructions before starting assembly &...
  • Page 4 LEAVE HINGES LOOSE LEAVE HINGES LOOSE LEAVE HINGES LOOSE LEAVE HINGES LOOSE WITH GAP WITH GAP WITH GAP WITH GAP It is important to secure the hinge sets (inner & outer) loosely so there remains a “gap” between the parts. This gap allows you to fit the gate in place between the inner &...