Table of Contents
Advertisement
Available languages
Available languages
instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to be
performed.
Use of the power tool for operations differ-
ent from intended could result in a hazard-
ous situation.
5.
Service
a.
Please use a qualified expert who uses
original replacement parts to repair
your power tool.
This will ensure proper functioning of the
power tool.
ADDITIONAL SAFETY INSTRUCTIONS
When using electric tools, basic
safety precautions should always be
followed to reduce the risk of fire,
electric shock and personal injury.
Read all these instructions before
attempting to operate this product
and save these instructions.
Before using the appliance
Check the following:
•
Make sure the voltage of the hot air gun
corresponds with the power voltage;
–
Are the mains lead and the mains plug in a
good state: strong, without ravels or
damages.
–
Caution is advised when using long
extension cables
•
Do not use the appliance under moist
circumstances;
•
The metal mouthpiece gets hot. Watch out
and do not touch the metal mouthpiece;
•
Prevent damage of the heating element.
Do not lock or block the mouth piece;
•
Do not leave the appliance when switched
on;
•
When in operation do not point the device
at people or animals
•
Never look into the hot air nozzle
•
Do not use this device in rain or damp
surroundings, or near explosive or flam-
mable products.
7063005-Maxxheat-Eco-Ma-1712-21.indb 7
•
Do not use the device on or near very dry
spots to avoid fire
•
Always remove the plug from the socket
when not using the device, when replacing
the nozzles or during maintenance of the
device
•
Do not point the device at the same place
for longer periods of time
•
Do not hold the device too close to the
surface about to be worked on as the
device can overheat
•
Pay attention to the direct / indirect work-
space as the heat can ignite flammable
materials, which are close by but not nec-
essarily in view
•
Do not allow the hot parts of the device to
touch the cord or other flammable
materials
•
The device should always be clean, dry
and free of grease and oil
•
Do not use the appliance for purposes
other than for which it is intended.
This appliance operates at a
temperature of 600 degrees without
visible signs of this temperature (no
flames), still there is a chance of fire
risk. Watch out for the hot air stream
from the mouth piece. This air
stream can cause burns.
When operating the appliance
•
If you are going to use the hot air gun,
vapours and gas can be released during a
short time. This can be harmful for your
health. Asthmatics can suffer hindrance of
it;
•
Before connecting the plug to the mains
voltage you have to check if the switch is
in position "0";
•
Keep the mains lead always away from the
mouthpiece of the hot air gun;
•
Keep children and animals away from the
appliance if you are using it.
•
Keep all parts of the body away from the
metal heating head. Do not touch it before
it is cooled down.
•
Carry the appliance by the handle when
the metal heating head is cooled down.
.
English
7
04-01-18 11:01
Advertisement
Table of Contents
