Overview of the remote
control
a
b
c
d
a
• Turn on the unit.
• Switch the unit to standby mode.
b +/-
• Adjust volume.
c
• Select the iPod/iPhone source.
d
• Mute or restore volume.
e
• Select the MP3-LINK source.
f
• select the USB source.
/
g
• Skip to the previous/next track.
h
• Start or pause play.
EN
8
3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
h
sequence.
g
Connect speakers
f
e
Note
•
For optimal sound, use the supplied speakers only.
•
The supplied DIN cable is only intended for use with
this product. Never try to connect any other devices
through this cable.
Connect the supplied DIN cable to the CABLE
IN sockets on both speakers:
•
active speaker (with buttons): right channel
•
passive speaker: left channel