Contents 1 Important Safety Notice 2 Your Docking Entertainment System 6 Introduction What's in the box Overview of the speakers Overview of the remote control 3 Get started Connect speakers Connect power Prepare the remote control Turn on 4 Play Play from iPod/iPhone Play from an external device Control play...
1 Important Safety Important Safety Instructions • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
(2004/108/EC), do not detach the plug from the power cord. Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No.
Overview of the speakers a SRC • Select a source: iPod/iPhone; USB; MP3-LINK. • Select the sync mode. c +/- • Adjust volume. • Headphone socket. e DOCK • Dock for iPod/iPhone. f MP3-LINK • Connect an external audio player through the supplied MP3 link cable.
Overview of the remote control • Turn on the unit. • Switch the unit to standby mode. b +/- • Adjust volume. • Select the iPod/iPhone source. • Mute or restore volume. • Select the MP3-LINK source. • select the USB source. • Skip to the previous/next track.
Connect power Caution • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the bottom of the unit. • Before connecting the AC adaptor, ensure you have completed all other connections. • Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket.
Switch to standby mode The unit switches to standby mode, when: • In power on mode, press the main speaker. • In DOCK mode: no iPod/iPhone connected over 15 minutes. • In USB mode: no PC-USB connected over 15 minutes. •...
Remove the iPod/iPhone Pull the iPod/iPhone out of the dock. Push to close the dock compartment. Charge the iPod/iPhone When the unit is connected to power, the docked iPod/iPhone begins to charge automatically. Listen to the iPod/iPhone Note • Make sure that your iPod/iPhone has been loaded securely.
Play from an external device with supplied MP3 link cable Connect the supplied MP3 link cable to: • the MP3-LINK jack (3.5mm) on the back of the main speaker. • the headphone jack on an external device. Press on the remote control to select MP3 link mode.
5 Other features Synchronize the iPod/iPhone with PC Note • Make sure that iTunes has been configured properly in your PC. • If the iTunes can’t be configured properly, the synchronization process needs to be triggered in iTunes manually. Insert the iPod/iPhone in the dock. Connect your main speaker and PC with the supplied USB cable. Press on the main speaker.
6 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2 x 25 W RMS Frequency Response 30-2000 Hz Signal to Noise Ratio > 90 dB MP3 Link 600 mV RMS 20 kohm Speakers Speaker Impedance Woofer: 8 ohm...
If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.