To Replace The Remote Controls' Batteries; Standby-On/ Eco Power - Philips WAC700/05 User Manual

Note:
– Avoid placing your Center or Station close to the
plasma TV. It may resuit in improper display on
your Center's remote control.
– If you switch on your Center or Station using the
STANDBY-ON/ ECO POWER button on the
set, press REFRESH on Center's remote control
to synchronize the remote control's display.
– The display supports 6 European languages:
English, French, Spanish, Dutch, Italian and German

To replace the remote controls' batteries

Center's remote control:
1
Open the battery compartment and remove the
old batteries
2
Insert 4 batteries type R03 or AAA into the
remote control with the correct polarity as
indicated by the "+" and "-" symbols inside
the battery compartment
3
Put back the compartment door
2
3
1
Station's remote control:
1
Press and hold 1 as indicated
2
Simultaneously, pull the battery tray at 4
3
Remove the old battery and put a new CR2025
battery in place
4
Put back the battery tray
1
CAUTION!
– Remove batteries if they are
exhausted or will not be used for a long
time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed of properly.
Preparation
2
3
23