Setting Up Wi-Fi Connection Between Center And Station; Deleting A Station - Philips WAS700/05 User Manual

Installation
Setting up Wi-Fi connection
between Center and Station
You can add a station to an existing Wi-Fi
network of Center and Station. Up to 5
WAS700 stations can be connected to a
WAC700 Center.
On Center
1
Switch on WAC700 Center and select HD
source
2
To select Add New Station on Center
a. Press MENU
b. Use the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. In Station Mgnt menu, use the
navigation controls 3 or 4 and 2 to select
➜
You will enter the Installation Mode.
Searching for the new station start
➜
Playback stops on the previously associated
Station if you are playing the HD source
On Station
3
Connect the new station to power supply
4
Select your desired language: English,
Français, Español, Nederlands, Italiano
and Deutsch
➜
The set enters Installation Mode
➜
The search for Center starts.
On Center
5
Press STOP/Ç on the Center when all the
stations are found
IMPORTANT!
– Avoid thick walls. Your Center and Station should
never be blocked by 2 or more walls.
– Avoid placing the sets close to large metal
objects.
– Adjust the location of your Center and Station
according to the reception status of Wi-Fi signals.
– indicates maximum reception
– indicates minmum reception
– WACS700 do not support range expander
devices
16
If there is interference from neighborhood,
such as the pause during playback, the sets'
slow response to your operation
– Keep the Center or Station at least 3 meters
away from microwave ovens, DECT phones,
bluetooth devices (e.g. headphones, a computer
mouse), wireless access points (e.g. routers), cordless
phones, Wi-Fi compatible printers and PDAs, etc..
– Use the WEP* key when connecting your Center
and Station to an existing wireless PC network. See
the manual Connect to your PC
– Change the operating channel of your Center
and Station when connecting them to an existing
wireless PC network. To learn about how to change
channels, see the manual Connect to your PC
– If possible, change the operating channels of the
other Wi-Fi devices at your home.
– Turn the above devices in different directions to
minimize interference.
* stands for Wired Equivalent Privacy. It is a
security protocol for wireless local area
network

Deleting a station

1
Switch on WAC700 Center and select HD
source
2
To select Delete Station on Center
a. Press MENU.
b. Use the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. In Station Mgnt menu, use the navigation
controls 3 or 4 and 2 to select
➜
On the Center 's display shows the list of
connected stations
3
Press 3 or 4 and 2 to select the station you
wish to delete
4
Press 3 or 4 and 2 to select Yes