Residual Risk; Service - Lumedica OQ LabScope User Manual

Maximum Relative Humidity (RH) at 80% for temperatures up to 31C, decreasing linearly
o
to 50% RH at 40C.
Mains supply voltage fluctuations up to +/- 10% of nominal voltage.
o
Transient over-voltages up to the level of overvoltage category II.
o
Temporary over-voltages occurring on the mains supply.
o
Applicable pollution degree of intended environment is PD2.
o
 Cleaning optional monitor – monitor screen may be cleaned with an oil-free, lint free type cloth.
 Cleaning the system chassis – the chassis may be wiped down with an oil free, lint free cloth.
Canned air duster may be used to blow dust off of main unit.
 Cleaning scanner – scanner may be wiped down with oil free, lint free cloth. Canned air duster
may be used to blow dust off of scanner including optics. If optics becomes dirty or smudged,
such as with fingerprints, please contact Lumedica customer service.

Residual Risk

Please note the following residual risks associated with this equipment.
 Possibility of electrical shock if/when working inside electrical enclosures.
 Possibility of ergonomic injury when moving the equipment. The main unit (or system chassis)
weighs 4.0 kg, the scanner weighs 0.5 kg, and the optional scanner stand weighs 3.0 kg.

Service

Only trained and approved Lumedica personnel are allowed to service the system. Please contact
Lumedica support for more information.
Original Instructions Lumedica OQ LabScope 1.2 | Page 4 of 26