15.2
Restore previous firmware
After the firmware of Center is upgraded, you can restore it to its previous version as desired.
On Center
Press
MENU
to enter the menu screen.
1
3
4
2
Use
or
and
2
2
Press
to select Yes.
3
After upgrading or restoring the firmware of Center, you need to reestablish the Wi-Fi connection
between Center and Stations.
15.3
Re-establish Wi-Fi network of Center and Stations
On Center:
Press
MENU
to enter the menu screen.
1
3
4
2
Use
or
and
2
3
4
2
Use
or
and
3
> Searching for Stations starts.
On Station:
Disconnect the power plug of Station and then connect them to the power supply again.
1
> Connecting to Center appears.
Press
MENU
on the remote control to enter the selection screen of Installation Mode.
2
3
4
2
Use
or
and
3
> Stations start to connect to Center.
STOP 9
Press
on Center when all Stations are found.
4
Firmware upgrade
to enter Settings followed by Firmware, then Restore firmware.
to enter Station Mgnt menu.
to select Add New Station.
to enter Installation Mode.
81