BMPRO BatteryPlus35SR Installation Manual
BMPRO BatteryPlus35SR Installation Manual

BMPRO BatteryPlus35SR Installation Manual

+ rvview
Hide thumbs Also See for BatteryPlus35SR:

Advertisement

INSTALLATION GUIDE

BatteryPlus35
+ RVView
Make sure there is
adequate external
ventilation to or
a larger internal
cavity. Remove
battery if access is
required.
Mount securely to
a suitably strong
surface, using four
pre-drilled holes.
Install RVView where
it won't be subject
to water or liquids.
Drill a 25mm hole to
fit the data cable to
the RVView. Connect
BatteryPlus35 with
the data cable.
Mount the RVView
(screws provided)
then remove clear
protective plastic
from the front cover.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BatteryPlus35SR and is the answer not in the manual?

Questions and answers

Summary of Contents for BMPRO BatteryPlus35SR

  • Page 1: Installation Guide

    INSTALLATION GUIDE BatteryPlus35 + RVView Make sure there is adequate external ventilation to or a larger internal cavity. Remove battery if access is required. Mount securely to a suitably strong surface, using four pre-drilled holes. Install RVView where it won’t be subject to water or liquids.
  • Page 2 + RVView Connect Pin 1 negative to the Chassis. Connect the caravan battery to the terminals. Connect the Battery to BatteryPlus35SR Batt + & - inputs. The battery negative return must be connected to the BatteryPlus35 “BATT-” only. The battery negative...
  • Page 3 INSTALLATION GUIDE BatteryPlus35 + RVView Install the Battery fuse. Suitable fuse protection MUST be provided for the “AX” input. Connect all load negative returns directly to the BatteryPlus35 negative terminals only. Then connect the positive outputs. Install the Solar Input positive and negative input terminals.

This manual is also suitable for:

Batteryplus35 series

Table of Contents