Example Configurations - IDENTEC SOLUTIONS i-MARK 2 Installation And Hardware Manual

8.5 Example Configurations

Marker Loops at Gates
 Several loops in close proximity to each other
 All i-MARKs connected via i-BUS
 Tags pass through marker loops, they don't remain in them
The standard setting will be:
 Adjust the size of the inductive loop field with the loop current
 Give every i-MARK a unique Loop ID
 Leave Operation mode to "Continuous"
 Set transmission slots unique for each loop in proximity
 Set only the first device on the i-BUS to Master Mode
The example shows a setting for 2 adjacent marker loops. This i-MARK is set to use only the odd slot
numbers. The second loop is be set to use the even slot number.
VISIBILITY DELIVERED.
i-MARK 2 / i-MARK 3
USER MANUAL
PAGE 45 OF 55