Initial Operation; General; Tools Required; Connecting To The I-Mark 2/3 For Configuration - IDENTEC SOLUTIONS i-MARK 2 Installation And Hardware Manual

8 INITIAL OPERATION

8.1 General

Do not open the housing.
Opening the housing is not necessary in order to set the i-MARK2/3. The unit has no internal setting
elements or displays. All settings are performed using software via the service interface.

8.2 Tools required

 Service PC running Microsoft Windows or compatible Mobile PC or handheld running Windows
Mobile/CE
 ILR Configuration Tool (software)
 USB to RS422 Converter, order code: 292 771

8.3 Connecting to the i-MARK 2/3 for configuration

USB
Service PC
USB-RS422
Service Software:
ILR Configuration Tool
VISIBILITY DELIVERED.
i-MARK 2 / i-MARK 3
USER MANUAL
Converter
i-BUS
(to Master)
i-BUS
i-MARK i-MARK
(to Slave)
Up to 8 bus units
i-MARK
PAGE 42 OF 55