Do's And Don'ts; Troubleshooting - SoundLogic XT RAINBOW Instruction Manual

Redial last number
Listening to Music Wirelessly
Please ensure that your device (iPhone, Tablet or Other Smart Phone) is paired with the Bluetooth
Speaker to stream music wirelessly. Once it is paired, play music from your device.
Function
Increase /
Decrease Volume
Pause
Play
Skip Forward /
Skip Backward
(Note: An indication tone will alert you when the volume is adjusted to the maximum or minimum level.)
Play music through "Auxiliary" mode
▪
Turn ON the speaker.
▪
Insert one end of the Auxiliary cable (included) into the Auxiliary port, and the other end to the
audio device (such as phone / MP3 Player / computer / tablet / .....etc.).
▪
Select your favourite song at the source device to play.
▪
Long push the Volume + to left will increase the volume or long push the Volume - to right will
decrease the volume.
Note: Play, Pause, Skip Forward, Skip Backward etc can only be controlled through the source devices,
while playing music in Auxiliary mode.

Do's and Don'ts

Do not play music at excessive levels. Damage to hearing and/or equipment may result.
Do not use outdoors in excessive rain or extreme weather conditions.
Tips!!
When the speaker is not in use, turn it OFF in order to save the battery power.

Troubleshooting

Problem
Low sound level
Standby mode Short press the Phone button twice
and connected
to a device
Operation Button
Playing music Long push the Volume + to left will increase the volume or long
push the Volume - to right will decrease the volume
Playing music Short press the play/pause button once will pause the music
Pause Short press the play/pause button once will resume the music
Playing music Short push the Next track button to left will skip forward the
track. Short push the Previous track button to right will skip
backward the track.
Possible Cause
Source (Tablet, Mobile Phone, Laptop,
etc.) volume too low.
Battery dead
Solution
Adjust source volume
Charge Battery
5