Component Video Output: Connecting A Television - GPX D1816SIL Instruction Manual

Hide thumbs Also See for D1816SIL:

Table of Contents

Component Video Output: Connecting a Television

When connecting two products using an Component Cable, match the colored ports

with the same colored connection. (Green to Green, Red to Red, and Blue to Blue)

1. Connect a Component Cable (not included) to the Component Video Outputs on the

unit and the component video inputs on the Television

. Connect the RCA Cable to the Audio Outputs on the unit to the audio/video inputs on

the Television.

. Turn the unit on by pressing the Standby Button.

. Change the Video Out setting on the unit to YPbPr. See "The Setup Menu" on page

10 & 11.

5. Change the television to the correct video input setting.

6. Video played through the unit will now be seen on the connected television.

Press the Video button on the remote control to cycle through S-Video, YUV, and P-

Scan.

RCA Cable

(included)

Component Video Cable

Table of Contents