Kogan KAM172UPSFA User Manual page 8

INSTALLATION (cont'd)
5. Using a Phillips head screwdriver, remove the screws fixing the
bottom hinge. Whilst removing the bottom hinge, ensure the
freezer incline angle is less than 45 degrees – do not lay it flat.
6. Follow the same procedure as inverting the hinge pivot point in
the upper hinge bracket (step 3), and fix the lower bottom hinge
bracket in place on the other side of the freezer (2c).
7. Insert the door into the bottom hinge pivot and re-fix the top hinge
bracket, securing the door into place.
8. Replace the hinge covers and use the adjustable feet to ensure the
freezer is level.
8
Figure 2c