BANGTAN Sunshade CYM-LD8 Manual page 6

○ How to adjust the product angle (multi-joint lever, parking plate angle)
1.
At the time of factory shipment, most products are set to the center angle and the highest height, which are suitable for the
window frame of a vehicle.
2.
However, if the upper shape of the window frame is high or low angle depending on the vehicle model, the initial setting is done
in the following two ways.
Adjust the multi-joint height adjusting lever (A) and (B) up and down to fit the door frame
Method 1
Move the two fastening pieces for elevation or low angle and carry out method 1 as necessary.
☞ It is set to the middle angle (2, 5) at the factory.
Method 2
The height can be adjusted to fit the window frame.
Please use it after.
B
High
Middle
Low
How to adjust
3rd hole
6 th hole
High Angle
A
1st hole
4th hole
Low Angle